Dion Equipment Sales Inc

Don't forget to call me on your rubber track needs! Generally one day freight in, resonable prices and great quality from a supplier I have used for several years with excellent feedback. No, I'm not always the cheapest (and yes I can get some of the super cheap brands, just choose not to) but these are a great bang for the buck! Usually don't stock them but do currently have one track to fit Mustang Me8003, comparable Gehl model, and some Komatsu PC75 units.

Also a quick track note- have a set of take off steel tracks, with about 2200 hours on them from a Terex TC48- also should fit some NH and Case cx50 / e50 excavators- They were getting loose but not falling off. Should be able to take a link out. First $600 buys that set

Also have a set of NEW take off steel tracks for I beleive the newer serial break e50 NH and Case CX50b excavators- these are new on a pallet, just a couple hours on them from a new machine, were taken off for a customer that wanted rubber instead. With the front rock guards. $2000 Steals these like new tracks!!!

Also one set of take offs from a Cat 305.5e2 - fits 305 and 305.5 models, D series and up, possibly older as well. Had only 990 hours on them. With the rock guards. $2,000. 

Some current Excavators in the yard-

 2002 John Deere 230c lc - pretty striaght unit, about 11,000 hours. Runs/works well, bucket loose. Sold this to a local customer about 5 years ago. Has a little blow by, he says goes through about a half gallon of oil a week if run steady. Approx weight 54,000lb-

Hold-97' Komatsu PC300-6- Good running, operating machine. Weighs a little over 70k. Runs, digs, moves great. Approx 17k hours. Good bottom. This rig is a digging fool. Sold to a lcoal customer 5 or so years back, just traded back in toward another machine.

 Only (2) remain folks-  new Cat demo/leftovers left!  MEWOW!!!! The 302.7D cr below is already sold, all the 305.5's are sold!  Have (2) Cat 305E2 left.  Loaded cabs, cat hydro thumbs, manual quick couplers, dig and clean up buckets!!! Warranty till approx Jan of 22' !!! Only two remain, both with less than 4 hours on the meter- Never been in the dirt!



-2007 Volvo EC360BLC - approx 82,000lb machine- approx 11-12,000 hours. Machine runs and works. Plumbd for hammer, has quick coupler. Local machine, been pretty well taken care of. 

2018 New Holland E60C - hydraulic coupler, hydraulic thumb, dig bucket and clean up bucket with bolt on edge. Loaded cab, balance of warranty. Same size, design unit as above in New Holland colors. Hyundai signed 10 year agreement to provide 6-ton class and smaller excavators for Case / New Holland. Lists for just a whisker under 100k. Yours for $79,000!!!

Attachments for cat 303,303.5, (all series) and 304- d, e, and e2 series. Please note, these do not fit the 305's or the older C series 304's.

New 47" cleanup $1300

Used 47" clean up with bolt on edge $850

New 47" tilting clean up  $3600

Both cat brand, new on the pallet!

Also have new aftermarket clean up bucket for 303 and 304d,e - 42" $1,000

And Cat 305, 305.5, and older 304 and 304C series- 48", $1200.

  Hyundai Robex 160LC-9 Nice late model excavator, 5347 hours, mechanical thumb, backup camera, ac. took this in a year or so ago, did about 10k in work to it then.  One new final drive seal and bearings, swing motor seal, new alternator, bucket teeth. Couple cylinders were starting to weep they have been repacked. Oils and filters changed.   New starter as well.  Used for a few jobs around here, now its time to go! Nice size machine, weighs about 39,000lb.  Specs out like a 315 cat, price a 5 year old low hour 315 then after it scares the pants off you come buy this one! Great value, well engineered machines. Price reduced, $59,000.